To have a comfortable field environment, not only the overall environment should be clean and tidy, but also the shower equipment should be installed in place. The shower hose is an essential part of the shower equipment. If it is not installed in place, it may cause water leakage and affect people's bathing. Today, we will show you how to install the sprinkler hose.
1. First, measure the size of the installation hole, and then use a marking pen to describe the size of the hole spacing, so as to facilitate the next installation.
2. Punch holes according to the size marked on the wall. Use professional tools to punch holes. After punching, install the S-bend joint to facilitate the connection of the sprinkler hose. Several layers of adhesive tape can be wrapped around the interface to ensure sealing and reduce water leakage during future use.
3. When installing the shower, take out the entire faucet, put the foot pad into the nut, connect it with the S-bend joint, and then fasten it with the nut. In order to protect the valve core in the faucet, a filter screen can be installed inside before installation.
4. Next, you need to connect the sprinkler software and the change-over switch of the water heater. This step is relatively simple and can be fixed directly by hand.
5. After the shower hose is installed, the site should be cleaned to ensure the cleanliness of the bathroom.
