How to install the bathroom shower hose

First, we need to measure the size of the mounting hole accurately, and then draw the hole size in a black color pen.

then you need to punch holes in the wall according to the size of the description, here is best to ask the professional punching master, after the hole is required to install the S-splicing joint, so as to facilitate the connection with the shower hose later. In addition, it is necessary to wrap a multi-layer tape at the interface, so as to ensure the sealing requirement and reduce the probability of water leakage during use.

When installing the shower, you need to take out the whole faucet first, then put the foot pad into the nut, connect it to the S-bend joint, and lock the nut. In order to better protect the spool in the faucet, it is necessary to install the internal filter and then install the shower faucet to make it practical for a long time.

Next, you need to connect the stainless steel software of the shower to the switch of the water heater. This step is relatively simple, just use your hands to fix it.

The final step is to fix the top spray and the bracket. It is best to use a wrench here, which is more difficult to loosen in the future.